{"id":490,"date":"2026-07-29T14:17:41","date_gmt":"2026-07-29T08:47:41","guid":{"rendered":"https:\/\/www.tescosteel.com\/blog\/?p=490"},"modified":"2026-07-24T14:44:35","modified_gmt":"2026-07-24T09:14:35","slug":"how-to-check-if-a-flange-meets-en-1092-1-standard-requirements","status":"publish","type":"post","link":"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/","title":{"rendered":"How to Check if a Flange Meets EN 1092-1 Standard Requirements"},"content":{"rendered":"<p><span style=\"font-weight: 400;\">EN 1092-1 steel flanges avoid project delays and operational failures due to out-of-spec pipe components that could lead to a catastrophe. Bolt hole misalignments or the lack of heat certificates might bring installations to a standstill. This European standard addresses these problems by defining common measurements, tolerances and markings. This means that all complying steel flanges, made by different companies all around the world, are still fully interchangeable, creating a fully secure, standard and dependable pressurized pipe system.<\/span><\/p>\n<h2><b>What Is EN 1092-1?<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">EN 1092-1 is a European standard for steel round <strong><a href=\"https:\/\/www.tescosteel.com\/flanges-special-product.html\">flanges for pipelines<\/a><\/strong>, valves and fittings. It defines standard pressure-temperature ratings (PN classes), bolt circle diameters and face dimensions. This standard is absolutely essential for worldwide component interchangeability, safety and stringent regulatory compliance in all European piping projects for heavy sectors such as oil, gas and chemical processing.<\/span><\/p>\n<h2><b>Key Requirements of EN 1092-1 Flanges<\/b><\/h2>\n<h3><b>Correct PN Rating<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">PN rating is the pressure class of the flange from PN6 to PN100. It indicates the maximum allowable pressure at 20 C. Because of permissible pressure derates at higher temperatures, be sure the rating fits the maximum operational temperature restrictions for your system safely.<\/span><\/p>\n<h3><b>Standard Dimensions<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">EN 1092-1 tables include exact bolt circles, numbers of holes and diameters for each DN and PN combination. Accurate physical dimensions ensure that components made by different companies will be compatible. This is the basis for worldwide piping interchangeability.<\/span><\/p>\n<h3><b>Material Specification\u00a0<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">The standard approves certain carbon, alloy and stainless steel grades based on temperature and corrosion requirements. The stamped marking on the flange shall be of an authorized EN grade and the material test certificate shall confirm the chemical and mechanical qualities.<\/span><\/p>\n<h3><b>Facing Type<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Sealing Face Type EN 1092-1 defines different sealing faces as Type A flat face and Type B raised face. The correct type of facing ensures the correct seating of the gasket, prevents damage to the flange when tightening and ensures a leak-free joint within the connection assembly.<\/span><\/p>\n<h3><b>Manufacturing Tolerances<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">The standard specifies permissible tolerances for outer diameter, bore, thickness and bolt circles. Flanges machined outside these stringent parameters fail compliance audits, as even tiny structural variations cause major bolt misalignments or joint failures.otherwise appear correct.<\/span><\/p>\n<h3><b>Marking Requirements<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Each compliant flange carries specific markings:<\/span><\/p>\n<ul>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Manufacturer&#8217;s identification<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Standard designation (EN 1092-1)<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Material designation<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">PN rating and DN (nominal diameter)<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Flange type designation<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><span style=\"font-weight: 400;\">Heat or cast number enabling material traceability<\/span><\/li>\n<\/ul>\n<p><span style=\"font-weight: 400;\">Missing or illegible markings disqualify the flange from EN 1092-1 compliance regardless of its dimensional correctness.<\/span><\/p>\n<h2><b>Step-by-Step Inspection Process for EN 1092-1 Compliance<\/b><\/h2>\n<h3><b>Step 1: Check Flange Markings<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Check that the body markings stamped on the body clearly show EN 1092-1, the specified DN size, PN rating and material grade. For full traceability of the batch, ensure the heat or cast number stamped matches the material test certificate.<\/span><\/p>\n<h3><b>Step 2: Verify Dimensions<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">The bolt circle, number of holes, hole diameter, outer diameter, bore and thickness shall be measured with a calibrated vernier calliper with an accuracy of 0.02mm. For full agreement confirm these values directly with the EN 1092-1 dimensional reference tables.<\/span><\/p>\n<h3><b>Step 3: Confirm Material Certification<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Check the Mill Test Certificate (MTC) to check that the chemical composition and mechanical properties are within the strict limits of the norm. Confirm that the single heat number on the document matches the actual stamp on the flange body.<\/span><\/p>\n<h3><b>Step 4: Inspect Surface Finish and Facing<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Inspect sealing face for correct concentric or spiral grooving pattern and proper raised face height. Surface shall be free from radial scratches, tool marks or pits which will not allow tight, even seating of the gasket.<\/span><\/p>\n<h3><b>Step 5: Check Pressure and Temperature Compatibility<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Refer to the standard for pressure-temperature derating tables for the PN rating to suit the system design pressure. For example, the allowed working pressure of a PN40 carbon steel P250GH flange at 250\u00b0C is lower than at the reference ambient temperature of 20\u00b0C.<\/span><\/p>\n<h3><b>Step 6: Review Documentation<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Final quality assurance documentation Hydrostatic pressure test records Dimensional inspection reports Mill test certificate (MTC). Each document shall be validated to the specific flange batch through the validated heat number.<\/span><\/p>\n<h2><b>Understanding EN 1092-1 PN Ratings<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">PN stands for <\/span><i><span style=\"font-weight: 400;\">Pression Nominale<\/span><\/i><span style=\"font-weight: 400;\">, the designation system used in European piping standards to indicate the pressure class:<\/span><\/p>\n<table>\n<tbody>\n<tr>\n<td><b>PN Rating<\/b><\/td>\n<td><b>Typical Application Environments<\/b><\/td>\n<\/tr>\n<tr>\n<td><b>PN6, PN10, PN16<\/b><\/td>\n<td><span style=\"font-weight: 400;\">Covers most water, utilities, and moderate-pressure process applications.<\/span><\/td>\n<\/tr>\n<tr>\n<td><b>PN25, PN40<\/b><\/td>\n<td><span style=\"font-weight: 400;\">Suits higher-pressure chemical and process industry service.<\/span><\/td>\n<\/tr>\n<tr>\n<td><b>PN63, PN100<\/b><\/td>\n<td><span style=\"font-weight: 400;\">Covers critical high-pressure applications including hydraulic systems and gas service.<\/span><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p><span style=\"font-weight: 400;\">Selecting a lower PN class than the design requires creates a direct safety risk. Selecting a higher PN class than necessary adds material cost without functional benefit\u2014and at high PN ratings, the physical size of the flange increases sufficiently to affect bolt wrench access and installation clearances in tight spaces.<\/span><\/p>\n<h2><b>Common Flange Types Covered by EN 1092-1<\/b><\/h2>\n<h3><b>Weld Neck Flanges<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">A long tapered hub welds directly to the pipe, distributing stress from the bolted joint away from the weld seam. These are suitable for high-pressure and high-temperature applications where the weld quality and joint integrity determine the pressure system&#8217;s safety.<\/span><\/p>\n<h3><b>Slip-On Flanges<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">These slide directly over the pipe end and weld at both the face and the bore. They offer a lower cost and are easier to install than weld neck designs, making them suitable for moderate-pressure service where the weld at the bore provides adequate joint integrity.<\/span><\/p>\n<h3><b>Blind Flanges<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Used to close pipe ends, vessel openings, and inspection ports. Blind flanges carry the full design pressure across their face without a pipe to support the load\u2014hence they require the thickest wall of any flange type at an equivalent PN rating.<\/span><\/p>\n<h3><b>Threaded Flanges<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Connect to pipe ends by threaded engagement, eliminating the need for on-site welding. These are suitable for small-bore piping systems and applications where on-site hot work is impractical or prohibited.<\/span><\/p>\n<h3><b>Lap Joint Flanges<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Pair with a stub end welded to the pipe\u2014the flange floats on the stub end, rotating freely to align bolt holes without rotating the pipe. They are commonly used in systems requiring regular dismantling for cleaning, inspection, or flow equipment access.<\/span><\/p>\n<h3><b>Loose Plate Flanges<\/b><\/h3>\n<p><span style=\"font-weight: 400;\">Slip over a formed end on the pipe, secured by the end geometry without welding. They allow angular adjustment during assembly, which is highly useful in situations where precise pipe cut lengths and alignment are difficult to achieve.<\/span><\/p>\n<h2><b>Common Signs of Non-Compliant Flanges<\/b><\/h2>\n<ul>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Missing Markings:<\/b><span style=\"font-weight: 400;\"> The most common non compliance signal. Real EN 1092-1 flanges will always have obvious and permanent marks.<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Incorrect Dimensions<\/b><span style=\"font-weight: 400;\">: Especially bolt circle diameter mistakes of 1-3mm, which lead to bolt hole misalignments that are only visible at the bolting stage.<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Unverified Material Grades<\/b><span style=\"font-weight: 400;\">: This can happen if the certificate refers to a grade that is not on the acceptable material lists of EN 1092-1, or if the heat number on the certificate does not match the marking on the body of the flange.<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Poor Machining Quality<\/b><span style=\"font-weight: 400;\">: Face runout greater than the permitted tolerances of EN 1092-1 or rough scratched face finishes that do not allow adequate gasket seating.<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Missing Certification Documents<\/b><span style=\"font-weight: 400;\">: The manufacturer has no way of proving conformity, regardless of how the flange looks.<\/span><\/li>\n<\/ul>\n<h2><b>Documentation Required for EN 1092-1 Compliance<\/b><\/h2>\n<ol>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Mill Test Certificate (MTC):<\/b><span style=\"font-weight: 400;\"> Covers chemical analysis and mechanical property test results for the specific heat from which the flange was forged.<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Dimensional Inspection Reports:<\/b><span style=\"font-weight: 400;\"> Confirms that all measured physical values fall strictly within EN 1092-1 tolerance tables.<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Pressure Test Records:<\/b><span style=\"font-weight: 400;\"> Applies where the specifications or project requirements call for hydrostatic testing of the flanges rather than relying on the default manufacturing pressure rating alone.<\/span><\/li>\n<li style=\"font-weight: 400;\" aria-level=\"1\"><b>Quality Assurance Documentation:<\/b><span style=\"font-weight: 400;\"> Includes inspection test plans, final release records, and non-conformance dispositions that allow third-party project inspection to confirm compliance without additional on-site destructive testing.<\/span><\/li>\n<\/ol>\n<h2><b>How to Choose a Reliable EN 1092-1 Flange Supplier<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">To select a reliable EN 1092-1 flange supplier, you should look into their actual competence with the standard and their extensive traceability infrastructure connecting components to source melts. Reliable partners need to have dimensional inspection equipment in-house so there is no need for on-site troubleshooting. Finally, look for suppliers with an ISO 9001 certification and full DN and PN inventory to substantially minimize important project lead times.<\/span><\/p>\n<h2><b>Conclusion<\/b><\/h2>\n<p><span style=\"font-weight: 400;\">The EN 1092-1 flange compliance check has to examine six points, among which the PN rating, the dimension, the material grade, the face type, the tolerances and the marks. Goods receipt checks are done using basic tools, dimension tables and documentation. To avoid operational concerns, only employ certified vendors with stock from PN6 to PN100. It is worth paying a little more for the first delivery to have completely compliant flanges with traceable material records to save important project time.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"<p>EN 1092-1 steel flanges avoid project delays and operational failures due to out-of-spec pipe components that could lead to a catastrophe. Bolt hole misalignments or the lack of heat certificates might bring installations to a standstill. This European standard addresses these problems by defining common measurements, tolerances and markings. This means that all complying steel &#8230; <a title=\"How to Check if a Flange Meets EN 1092-1 Standard Requirements\" class=\"read-more\" href=\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/\" aria-label=\"More on How to Check if a Flange Meets EN 1092-1 Standard Requirements\">Read more<\/a><\/p>\n","protected":false},"author":2,"featured_media":491,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[105],"tags":[],"class_list":["post-490","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-flanges"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v21.7 - https:\/\/yoast.com\/wordpress\/plugins\/seo\/ -->\n<title>How to Check if a Flange Meets EN 1092-1 Standard Requirements -<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Check if a Flange Meets EN 1092-1 Standard Requirements -\" \/>\n<meta property=\"og:description\" content=\"EN 1092-1 steel flanges avoid project delays and operational failures due to out-of-spec pipe components that could lead to a catastrophe. Bolt hole misalignments or the lack of heat certificates might bring installations to a standstill. This European standard addresses these problems by defining common measurements, tolerances and markings. This means that all complying steel ... Read more\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/\" \/>\n<meta property=\"article:published_time\" content=\"2026-07-29T08:47:41+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-07-24T09:14:35+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.tescosteel.com\/blog\/wp-content\/uploads\/2026\/07\/Flange-Meets-EN-1092-1-Standard-Requirements.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"740\" \/>\n\t<meta property=\"og:image:height\" content=\"416\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Tesco Steel &amp; Engineering\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Tesco Steel &amp; Engineering\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"7 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/\",\"url\":\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/\",\"name\":\"How to Check if a Flange Meets EN 1092-1 Standard Requirements -\",\"isPartOf\":{\"@id\":\"https:\/\/www.tescosteel.com\/blog\/#website\"},\"datePublished\":\"2026-07-29T08:47:41+00:00\",\"dateModified\":\"2026-07-24T09:14:35+00:00\",\"author\":{\"@id\":\"https:\/\/www.tescosteel.com\/blog\/#\/schema\/person\/420eeb76f55c9ef0866b377995b61479\"},\"breadcrumb\":{\"@id\":\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.tescosteel.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"How to Check if a Flange Meets EN 1092-1 Standard Requirements\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.tescosteel.com\/blog\/#website\",\"url\":\"https:\/\/www.tescosteel.com\/blog\/\",\"name\":\"\",\"description\":\"\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.tescosteel.com\/blog\/?s={search_term_string}\"},\"query-input\":\"required name=search_term_string\"}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.tescosteel.com\/blog\/#\/schema\/person\/420eeb76f55c9ef0866b377995b61479\",\"name\":\"Tesco Steel &amp; Engineering\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.tescosteel.com\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/14e4108de746b50bff420f29b7e7f9195ead38229a94df7f8e9f84f3506a2d0e?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/14e4108de746b50bff420f29b7e7f9195ead38229a94df7f8e9f84f3506a2d0e?s=96&d=mm&r=g\",\"caption\":\"Tesco Steel &amp; Engineering\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"How to Check if a Flange Meets EN 1092-1 Standard Requirements -","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/","og_locale":"en_US","og_type":"article","og_title":"How to Check if a Flange Meets EN 1092-1 Standard Requirements -","og_description":"EN 1092-1 steel flanges avoid project delays and operational failures due to out-of-spec pipe components that could lead to a catastrophe. Bolt hole misalignments or the lack of heat certificates might bring installations to a standstill. This European standard addresses these problems by defining common measurements, tolerances and markings. This means that all complying steel ... Read more","og_url":"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/","article_published_time":"2026-07-29T08:47:41+00:00","article_modified_time":"2026-07-24T09:14:35+00:00","og_image":[{"width":740,"height":416,"url":"https:\/\/www.tescosteel.com\/blog\/wp-content\/uploads\/2026\/07\/Flange-Meets-EN-1092-1-Standard-Requirements.jpg","type":"image\/jpeg"}],"author":"Tesco Steel &amp; Engineering","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Tesco Steel &amp; Engineering","Est. reading time":"7 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/","url":"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/","name":"How to Check if a Flange Meets EN 1092-1 Standard Requirements -","isPartOf":{"@id":"https:\/\/www.tescosteel.com\/blog\/#website"},"datePublished":"2026-07-29T08:47:41+00:00","dateModified":"2026-07-24T09:14:35+00:00","author":{"@id":"https:\/\/www.tescosteel.com\/blog\/#\/schema\/person\/420eeb76f55c9ef0866b377995b61479"},"breadcrumb":{"@id":"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.tescosteel.com\/blog\/how-to-check-if-a-flange-meets-en-1092-1-standard-requirements\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.tescosteel.com\/blog\/"},{"@type":"ListItem","position":2,"name":"How to Check if a Flange Meets EN 1092-1 Standard Requirements"}]},{"@type":"WebSite","@id":"https:\/\/www.tescosteel.com\/blog\/#website","url":"https:\/\/www.tescosteel.com\/blog\/","name":"","description":"","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.tescosteel.com\/blog\/?s={search_term_string}"},"query-input":"required name=search_term_string"}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.tescosteel.com\/blog\/#\/schema\/person\/420eeb76f55c9ef0866b377995b61479","name":"Tesco Steel &amp; Engineering","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.tescosteel.com\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/14e4108de746b50bff420f29b7e7f9195ead38229a94df7f8e9f84f3506a2d0e?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/14e4108de746b50bff420f29b7e7f9195ead38229a94df7f8e9f84f3506a2d0e?s=96&d=mm&r=g","caption":"Tesco Steel &amp; Engineering"}}]}},"_links":{"self":[{"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/posts\/490","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/comments?post=490"}],"version-history":[{"count":1,"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/posts\/490\/revisions"}],"predecessor-version":[{"id":492,"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/posts\/490\/revisions\/492"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/media\/491"}],"wp:attachment":[{"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/media?parent=490"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/categories?post=490"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.tescosteel.com\/blog\/wp-json\/wp\/v2\/tags?post=490"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}